Introduction
For confirmed security professionals and law-enforcement only.
The Plug Puller is a must-have tool for lock-professionals. When non-destructive entry fails, or if emergency access is required, the Plug Puller is the most reliable destructive-entry tool that exists.
A screw is inserted into the cylinder, and the Plug Puller is seated over the top. Turn the knob on the back of the puller, and the cylinder is removed.
The tool can also be used in conjunction with the included plates to remove only the plug from the cylinder.
From start to finish, a typical operation is finished in less than three minutes.
Originally developed for law-enforcement, the Plug Puller does not damage the door or frame. Built from high-tensile spring steel for regular and frequent use, the Plug Puller is a must-have tool for professionals.
In a nutshell
Below is an overview of the Lock401 Plug Puller:
High-Tensile Steel
Designed to resist daily-use for many years
Rapid Opening
From preparation to open in under three minutes.
Highly Compatible
Works with EU, Round and Cylinder locks.
Pack Contents
- 1x Lock Puller
- 1x Euro-profile Plate
- 1x Round-Cylinder Plate
Technical Information
- Puller Dimensions: 12 x 5 x 5cm
- Plate Dimensions: 85 x 4 x 5mm